Back Room Storage
Call for Pricing (610)756-6968
email: Craig222@webtv.net
Wide Span
------------------------------------------------------------
WIDESPAN
1. Widespan has four basic parts: upright frames, beams, shelf supports and shelves combine to form a stable unit. There are optional heavy duty components for even greater load and hand-stacker pallet loading.
MAXIMUM EVENLY DISTRIBUTED STATIC LOAD CAPACITY: 10,000 lbs. per upright frame
at 48 maximum beam spacing.
2. Square slotted posts and welded tubular braces form a strong, rigid frame. Slotted post provides 1 1/4 on center beam adjustability. Top beam can fit flush with top post. Order one upright frame for each section and one for the end of each run.
A 3 steel beam has ledge and integral beam brackets.
Two beams are required per storage level, a minimum of four required per
section.
Shelf supports are required to tie beams together, even when not using a shelf.
Shelf supports rotate easily into place to support the shelf and tie the beams
together.
Order 2 shelf supports on 48 and 60 beams.
Order 3 shelf supports on 72 and 96 beams.
Beams in this application will hold:
48 long
3,000 lbs.
60 long
2,500 lbs.
72 long
2,000 lbs.
96 long
1,600 lbs.
3. Shelves are 5/8 unfinished particle board.
Size Information
|
clear opening between posts |
nominal shelf length minus 1 3/4k |
|
overall length |
length of continuous run is the sum of the nominal unit length plus 1Ύ |
|
overall depth |
nominal size is actual depth of unit |
|
vertical clearance between shelves |
standard duty widespan minus 3 1/8w less
than the center-to- center shelving spacing |
|
vertical adjustments |
adjustable on 1 1/4 increments |
|
bracing |
.
front-to-back braces are provided in
pre-assembled frame |
Click Below:
Back to Home Page: C & E Used STORE FIXTURES
Back to Home Page: www.shelfguy.com